L 98685 FLL 96485 FLWASHING MACHINE USER MANUAL
IThe default spin speed of the programme._ _ _No spin 1)Rinse hold1) Only available for Spin/Drain programme.JThe default temperature of the programme
The programme duration in-creases.This function is not availablewith a temperature lower than40° C.VORWÄSCHEUse this function for heavy soil.The appli
WASHING PROGRAMMESProgramme Temperature Type of loadWeight of loadProgrammedescriptionFunctionsKoch/Bunt 95° - Cold White and col-oured cottonwith hea
Programme Temperature Type of loadWeight of loadProgrammedescriptionFunctionsFeinwäsche 40° - ColdRinsesShort spinDelicate fabricsas acrylics, vis-cos
Programme Temperature Type of loadWeight of loadProgrammedescriptionFunctionsSpülen 0° All fabricsMaximum load 8kgRinse with ad-ditivesSpin phaseSPIN
5) The default spin speed is for cotton items. Set the spin speed applicable with your laundry.6) If you select this function the appliance performs o
Programme1)Energy consumption(KWh)2)Water consump-tion (litre)2)Cotton 40 °C economy3)0.70 57The cotton 60 °C economy and cotton 40 °C economy are the
7.Touch button 6 to confirm the se-lection.USING THE APPLIANCE1. Open the water tap. 2. Connect the mains plug to themains socket.ACTIVATING THE APPLI
Make sure not to have the laundry outof the drum between the seal and thedoor. There is the risk of water leakageor damage laundry.USING THE DETERGENT
Check the position of the flap1. Pull out the detergent dispenser un-til it stops.2. Press the lever down to remove thedispenser.3. To use powder dete
SERVICEWhen contacting Service, ensure thatyou have the following data available.The information can be found on therating plate.ModelPNCSerial Numbe
Before you touch button 6 tostart the appliance, you can can-cel or change the set of the de-lay start.You cannot set the delay startwith the Steam pr
4.The indicator of button 6 goes off.5. The door lock symbol goes off.6.Press button 1 to deactivate theappliance. After five minutes fromthe end of t
DETERGENTS AND ADDITIVES• Only use detergents and additivesspecially made for washing machines.• Do not mix different types of deter-gents.• To help t
• Set the hottest cotton wash pro-gramme• Use a correct quantity of powder de-tergent with biological properties.After each wash, keep the door openfo
5. Clean the dispenser recess with abrush.6. Put back the dispenser in the recess.DRAIN PUMPRegularly examine the drainpump and make sure that it iscl
125. When the container is full of water,put the drainage duct back againand empty the container. Do steps 4and 5 again and again until no morewater f
To clean the water inlet filters:1. Close the water tap.2. Remove the water inlet hose fromthe water tap.3. Clean the filter in the inlet hose witha s
TROUBLE SHOOTER AND SERVICEThe start of the appliance does not oc-cur or it stops during operation.Try to find a solution to the problembefore you con
PROBLEM WITHOUT ALARM MESSAGEProblem Possible cause Possible solutionThe appliancedoes not drainthe water.A washing programmewithout the drain phaseis
Problem Possible cause Possible solution You did not remove thepackaging and/or thetransit bolts.Remove the packaging and/orthe transit bolts. Refer
FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn
SERVICE• Refer to the information suppliedwith this appliance for guaranteecondition and point of contact. Theinformation to give to the service ison
2. Remove the cardboard top.3. Remove the polystyrene packagingmaterials.4. Remove the internal film.5. Open the door. Remove the poly-styrene piece f
127. Remove the polystyrene protectionfrom the bottom.8. Pull up the appliance in vertical po-sition.9. Remove the power supply cable andthe drain hos
WARNING!Remove all the packaging andthe transit bolts before you in-stall the appliance.We recommend that you keepthe packaging and the transitbolts f
THE INLET HOSE35O35O35O45O45O45O• Connect the hose to the appliance.Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rec
With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide can-not move when the appliance drains.Attach the guide to the
You can extend the drain hoseto maximum 400 mm. Contactthe service centre for the otherdrain hose and the extension.36
ENGLISH 37
38
ENGLISH 39
SAFETY INFORMATIONBefore the installation and use, readthis manual carefully:• For your safety and the safety of yourproperty• To help the environmen
www.aeg.com/shop 132940551-A-492010
WARNING!Do not look directly into thebeam of the lamp.To replace the internal lamp,contact the service centre.Disconnect the mains plug fromthe mains
ENVIRONMENT CONCERNSPACKAGING MATERIALSRecycle the materials with the symbol .Put the packaging in applicable con-tainers to recycle it.ECOLOGICAL HI
ACCESSORIES1 2341SpannerTo remove the transit bolts.2Plastic capsTo close the holes on the rear sideof the cabinet after the removal ofthe transit bol
•Before press button 6 , you do notuse the appliance for five minutes.Press button 1 to activate the appli-ance again.• After 5 minutes from the end o
• The end time of the washing programme .Programme end symbolThe symbol comes on when the digits shows the pro-gramme end time.•The time of delay– Whe
Comments to this Manuals