Aeg-Electrolux L14950A User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
1. Load the laundry.
2. Add detergent and fabric softener.
3. Switch the machine on: turn the selector dial to the required washing programme/fab-
ric.
4. Press the relevant buttons to set the required options.
If possible, do not set a spin speed lower than that proposed by the appliance to avoid too
long a drying time therefore saving energy.
In any case the lowest values you can select are 900 r.p.m. for cottons and synthetics
and 700 r.p.m. for delicate fabrics. The reduction of the spin speed is only possible after
selecting drying.
5. Press the button 4 to set the drying time. The display shows the entire duration of the
washing and the set drying cycle.
6. Press the button 7 to start the programme. After the programme has started, the time
remaining is updated every minute.
7. At the end of the programme, follow the indications given in the previous chapter.
Then, turn the selector to the O position to switch the machine off.
8. Remove the laundry.
WASHING PROGRAMMES
Programme - Maximum and Minimum Temperature -
Cycle Description - Maximum Fabrics Load - Type of
Laundry
Options
Detergent Com-
partment
COTTONS/LINEN
ALGODÓN
95° - 60°
Main wash - Rinses - Long spin at the maximum spin
speed
Max. load 8 kg - Reduced load 4 kg
1)
White cotton (heavily or normally soiled items).
SPIN REDUCTION
NIGHT CYCLE
RINSE HOLD
PREWASH
2)
STAIN
SENSITIVE
EXTRA RINSE
DAILY
SUPER QUICK
1)
40 - 60 MIX
40°
Main wash - Rinses - Long spin at the maximum spin
speed
Max. load 8 kg
White and coloured cotton This programme can be
used for laundry, which should be washed at 40°C or
60°C separately. The maximum load capacity can be
put into the drum in order to save energy and water.
The same good washing result will be obtained as for
normal programme at 60°C.
SPIN REDUCTION
NIGHT CYCLE
RINSE HOLD
PREWASH
2)
STAIN
SENSITIVE
EXTRA RINSE
Washing programmes 17
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 83 84

Comments to this Manuals

No comments