Aeg-Electrolux L61470WDBI User Manual download pdf (Page 17)

9.9 Setting the DELAY START

(button 9)

Press this button again an again to set

the required delay.

The display shows the set delay time val-

ue (up to 20 hours) for some seconds,

then it shows the duration of the pro-

gramme again.

Set the delay before you press the but-

ton 8.

You can delay the wash programme can

be delayed from 30 min - 60 min - 90

min, 2 hours and then by 1 hour up to a

maximum of 20 hours.

Adding items after you have set the

delay (throughout the delay time the

door will be locked):

• Press the button 8 to put the machine

in pause

• Add the laundry, close the door .

• Press the button 8 again.

Setting the delayed start:

• Set the programme and the required

options.

• Set the delay start.

• Press the button 8: the appliance

starts its hourly countdown.

The programme will start after the se-

lected delay has expired.

Cancelling the delayed start:

• Press the button 8 to set the washing

machine to PAUSE;

• Press the button 9 once until the dis-

play shows the symbol

’;

• Press the button 8 again to start the

programme.

You can change the set delay on-

ly after you set the washing pro-

gramme again.

The Delay Start can not be selected with

DRAIN programme.

9.10 Altering an option or a

running programme

It is possible to change some options

before the programme carries it out. Be-

fore you make any change, you must

press the button 8 to pause the appli-

ance.

Changing a running programme is possi-

ble only by resetting it.

Turn the programme dial to

and

then to the new programme position.

Press the 8 button again to start the new

programme. The washing water in the

tub will not emptied out.

9.11 Interrupting a

programme

Press the button 8 to interrupt a pro-

gramme which is running, the corre-

sponding light starts blinking. Press the

button again to restart the programme.

9.12 Cancelling a programme

Turn the selector dial to to cancel a

programme which is running. Now you

can select a new programme.

9.13 Opening the door

When the machine is working and

through the delay time, the door is

locked.

If, for any reason, it is necessary to open

it, firstly press the button 8 to set the

machine to pause

If the light C after a few minutes goes

off, the door can be opened.

If the light C stays on and the door re-

mains locked, this means that the ma-

chine is already heating or that the water

level is too high. In this case the door

can not be opened.

If you cannot open the door but you

need to open it, turn the programme di-

al to

to switch the machine off. After

a few minutes the door can be opened

(pay attention to the water level and

temperature !) .

After closing the door, it is necessary to

set the programme and the options

again. Press button 8 to start the pro-

gramme again.

9.14 At the end of the

programme

The machine stops automatically. The pi-

lot light of button 8, the pilot lights A

and C go off. A blinking

will appear on

the display.

If you have set a programme or an op-

tion that ends with water in the tub, the

light C remains lit. The door is locked.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Comments to this Manuals

No comments