Aeg-Electrolux L61470WDBI User Manual download pdf (Page 9)

4.2 Display

The display shows the following information:

Duration of the set programme

When you set a programme, the display shows the duration in hours and

minutes (for example 2.05).

The duration is calculated automatically on the maximum load for each

type of fabric.

After the programme has started, the time remaining is updated every mi-

nute.

Set drying time

When you set a drying programme, the display shows the drying time in

minutes and/or hours (see paragraph «Programmes for timed drying »).

After the programme has started, the appliance updates the remaining

time every minute.

Alarm codes

In the event of operating problems, some alarm codes can be displayed,

for example (see chapter «Troubleshooting»).

End of programme

When the programme has finished, the display shows a blinking zero .

The Door light C, the Washing light A (or the Door light B) and the light of

button Start/Pause go out.

The door can be opened.

Incorrect option selection

If you set an option which is not compatible with the wash programme, the

display shows the message Err for some seconds.

The yellow pilot light of button Start/Pause light starts blinking.

Delay Start

When you press the relevant button to set the delay (20 hours max), it ap-

pears for some seconds, then the display shows the duration of the set

programme.

The delay time value decreases by one unit every hour. When only 1 hour

remains, the time decreases every minute.

Delay Start symbol

This symbol comes on when you set the delay time.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

No comments

Aeg-Electrolux L61470WDBI User Manual Page 9