Aeg-Electrolux L61470WDBI User Manual download pdf (Page 18)

To have a good drying

performance do not exceed

the maximum drying loads

recommended in the user

manual. Do not set a spin

speed lower than the

automatic speed of the set

programme.

11.2 Timed drying

1. Press the button Drying Time again

and again to set the time value (see

the «Programmes for timed drying»

table).

• Each time you press this button

the time value increases by 5

minutes.

• As the appliance calculates also

the duration of the anti-crease

and the cooling phases, the

programme time will

automatically increase by some

minutes.

2. Press Start/Pause button to start the

programme.

• The display shows regularly a new

time value.

• The indicator is on.

If you set only 10 minutes of

drying, the appliance

performs only a cooling

phase.

If the laundry is not sufficient dry, set

again a short drying time.

11.3 End of the drying

programme

The appliance stops automatically.

• The acoustic signals operate (if they

are active).

• In the display comes on.

• The indicator of the Start/Pause

button goes off.

• The last minutes of the drying cycle

the appliance performs a cooling and

anti-crease phase. The door is still

locked. The display show a flashing

.

When the door locked indicator

goes off, you can open the door.

1. Turn the programme knob to

position to deactivate the appliance.

After some minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

2. Remove the laundry from the

appliance.

Make sure that the drum is empty.

3. Keep the door ajar, to prevent

mildew and odours.

4. Close the water tap.

12.

DAILY USE - WASHING & DRYING

WARNING!

Refer to Safety chapters.

12.1 Non-Stop programme

(Automatic washing & drying)

For NON-STOP programme the

recommended load size is 3 kg for

cotton and 2 kg for synthetic.

CAUTION!

Do not use a dosing

device/ball when carrying

out a washing and drying

programme.

1. Load the laundry one item at a time.

2. Put the detergent and the additives

in the appropriate compartment.

3. Turn the programme knob to the

required programme to switch the

machine on.

4. Set the available options.

To have a good drying

performance do not exceed

the maximum drying loads

recommended in the user

manual. Do not set a spin

speed lower than the

automatic speed of the set

programme.

www.aeg.com18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments