Aeg-Electrolux L85275XFL User Manual

L 85275 XFLEN WASHING MACHINE USER MANUAL

EThe detergent overdosing comes on at the end of the cyclewhen the appliance detects too much detergent.FYou cannot open the appliance door when the s

The value shows the total number of the rinses.The indicator bar is fully filled when you set to the maximumnumber of rinses.LThe Stain symbol comes o

ACOUSTIC SIGNALSFUNCTIONYou can hear the acoustic signals when:• You activate the appliance.• You deactivate the appliance.• You press the buttons.• T

PROGRAMMESProgrammeTemperatureType of loadMax. weight of loadCycle descrip-tionFunctionsCotton95° - ColdWhite and colouredcotton with normal soil.max.

ProgrammeTemperatureType of loadMax. weight of loadCycle descrip-tionFunctionsAntiAllergy60°White cotton items.This programme re-moves micro-organisms

5) The default phase of the spin speed is related to cotton items. Set the spin speed. Makesure that it agrees with the laundry. To select the DRAIN p

CONSUMPTION VALUESThe data of this table are approximate. Different causes can change the data:the quantity and type of laundry, the water and ambient

BEFORE FIRST USE1.To activate the drain system, put 2 li-tre of water in the main wash com-partment of the detergent dispenser.2.Put a small quantity

The detergent compartment for the prewash phase, the soak pro-gramme and for the stain function.Add the detergent for prewash, soak and stain remover

4.To use liquid detergent, turn the flapdown.With the flap in the positionDOWN:– Do not use gelatinous or thickliquid detergents.– Do not put more liq

CONTENTS4 SAFETY INFORMATION5 TECHNICAL INFORMATION7 PRODUCT DESCRIPTION7 ACCESSORIES8 CONTROL PANEL13 PROGRAMMES16 CONSUMPTION VALUES17 BEFORE FIRST

When the countdown is completed,the programme starts automatically.Before you press button 4 tostart the appliance, you can cancelor change the set of

HELPFUL HINTS AND TIPSTHE LAUNDRY LOAD• Divide the laundry in: white, coloured,synthetics, delicates and wool.• Obey the washing instructions that are

Level TypeWater hardness°dH °T.H. mmol/l Clarke2 medium 8-14 16-25 1.6-2.5 10-163 hard 15-21 26-37 2.6-3.7 17-254 very hard > 21 > 37 >3.7 &g

CARE AND CLEANINGWARNING!Disconnect the appliance from the mainssupply before you clean it.DESCALINGThe water we use contains limescale. If itbecomes

DETERGENT DISPENSERTo clean the dispenser:121.Press the lever.2.Pull the dispenser out.3.Remove the top part of the liquid ad-ditive compartment.4.Cle

To clean the drain pump:1.Open the drain pump door.2.Pull the flap out to remove it.3.Put a container below the recess ofthe drain pump to collect the

129.Clean the filter under the water tapand put it back in the pump into thespecial guides.10.Make sure that you tighten correctlythe filter to preven

1.Put 2 litres of water in the main washcompartment of the detergent dis-penser.2.Start the programme to drain the wa-ter.FROST PRECAUTIONSIf the appl

TROUBLESHOOTINGThe start of the appliance does not occuror it stops during operation.First try to find a solution to the problem(refer to the table).

Problem Possible cause Possible solutionThe anti-flood de-vice is on. • Disconnect the appliance.• Close the water tap.• Contact the service centre.T

FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn

Problem Possible cause Possible solutionThe appliance fillswith water anddrain immediately.The end of the drainhose is too low.Make sure that the drai

INSTALLATIONFIXING PLATE KIT (405517114)Available from your authorized dealer.If you install the appliance on a plinth, se-cure the appliance in the f

5.Open the door. Remove the polystyr-ene piece from the door seal and allthe items from the drum.6.Put one of the polystyrene packagingelements on the

10.Remove the three bolts. Use the keysupplied with the appliance.11.Pull out the plastic spacers.12.Put the plastic caps in the holes. Youcan find th

• The appliance must be level and stable.CAUTION!Do not put cardboard, wood orequivalent materials below theappliance feet to adjust the level.THE INL

Water-stop deviceAThe inlet hose has a water stop device.This device prevents water leaks in thehose because of its natural ageing. Thered sector in t

Without the plastic hose guide.• To a sink spigot.Refer to the illustration. Put the drainhose in the spigot and tighten it with aclip. Make sure that

ENGLISH37

38www.aeg.com

ENGLISH39

SAFETY INFORMATIONBefore the installation and use, read thismanual carefully:• For your safety and the safety of yourproperty• To help the environmen

www.aeg.com/shop 132927820-B-082012

• Do not install and connect a damagedappliance.• Make sure to remove all packaging andtransport bolts.• Make sure that the mains plug is dis-connecte

Water supply 1) Cold waterMaximum load Cotton 7 kgSpin speed Maximum 1200 rpm1) Connect the water inlet hose to a water tap with a 3/4'' th

PRODUCT DESCRIPTION1 2 3 8956741011121Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump7Feet for the appliance level8Water

CONTROL PANEL1 2 3456789101On/Off button (Auto Off) 2Programme knob3Display4Start Pause button 5Delay start button 6Time saving button 7Extra rinse bu

PROGRAMME KNOB 2Turn this knob to set a programme. Therelated programme indicator comes on.DISPLAY 3A HJKLC D E F GBIThe display shows:AThe temperatur