Aeg-Electrolux L98690FL User Manual download pdf (Page 21)

Before you touch button

6

to

start the appliance, you can can-

cel or change the set of the de-

lay start.

You cannot set the delay start

with the Steam programme.

STARTING A PROGRAMME

1.

Touch button

6

to start the pro-

gramme. The indicator of button

6

stops to flash and is on with red col-

our.

If a delayed start is set, the appliance

starts the countdown.

The appliance adjust automat-

ically the cycle time to the

laundry you have put in the

drum to have perfect washing

results in the minimum neces-

sary time. After approximately

15 minutes from the start of

the programme, the display

shows the new time value.

INTERRUPT A PROGRAMME

1.

Touch button

6

. The indicator

flashes.

2.

Touch button

6

again. The wash-

ing programme continues.

CANCEL A PROGRAMME

1.

Press button

1

to cancel the pro-

gramme and to deactivate the ap-

pliance.

2.

Press button

1

again to activate

the appliance. Now, you can set a

new washing programme.

The appliance does not drain

the water.

CHANGE A FUNCTION

You can change only some functions

before they operate.

1.

Touch button

6

. The indicator

flashes.

2. Change the function set.

3.

Touch button

6

again. The wash-

ing programme continues.

OPEN THE DOOR

While a programme or the delay start

operates, the appliance door is locked.

To open the appliance door:

1.

Touch button

6

. The door lock

symbol in the display goes off and a

message tells you that the door is

unlocked.

2. Open the appliance door.

3. Close the appliance door and touch

button

6

again. The programme

or the delay start continues.

If the temperature and the level

of the water is too high, the

door lock symbol stays on. You

cannot open the door. If neces-

sary, do the following procedure

to open the door:

1. Deactivate the appliance.

2. Wait for some minutes.

3. Make sure that no water is in

the drum.

If you deactivate the appliance,

it is necessary to set the pro-

gramme again.

AT THE END OF PROGRAMME

1. The appliance stops automatically.

2. The acoustic signals operate, if it is

active.

3.

In the display

goes on and the

message tells you that the pro-

gramme is completed.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Comments to this Manuals

No comments