Aeg-Electrolux SW91822-4I User Manual download pdf (Page 27)

Prior to Initial Start–Up

• Please clean the appliance interior and all accessories prior to initial start-

up (see section: “Cleaning and Care”).

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if sup-

ply voltage and current values correspond with those of the mains at the

installation location.

e.g.: AC 220 ... 240 V 50 Hz or

220 ... 240 V~ 50 Hz

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply. The

supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electrical

installation must include suitable means of isolating the appliance from the

mains (e.g. fuse, cut-out, current trip or similar with a minimum contact

separation of 3 mm).

Attention: The mains connection cable may only be replaced by a skilled

electrician. Please contact your dealer or our customer service department

for repairs.

Housing dimensions

Height 1780mm

Depth 550 mm

Width 560 mm

Rehingeing the door

The appliance’s door has been locked in position for transport by means of

pins on both sides. According to the door opening direction, remove rele-

vant pins at the top and at the bottom.

Warning! When changing the side at which the door opens, the

appliance may not be connected to the mains. Remove plug from the

mains beforehand.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

No comments

Aeg-Electrolux SW91822-4I User Manual Page 27