Aeg-Electrolux SW91822-4I User Manual download pdf (Page 29)

DESIRED temperature means:

The temperature that has been selected for inside the compartment. The

DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the com-

partment.. The ACTUAL temperature is indicated with illuminated numbers.

Temperature display

The temperature display can indicate several pieces of information.

• During normal operation, the temperature currently present in the com-

partment. (ACTUAL temperature) is displayed.

• When the temperature is being adjusted a flashing display indicates the

compartment temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1. Plug the mains plug into the mains socket.

2. If the display is OFF press ON/OFF button. The green mains pilot indicator

illuminates. The appliances start.

3. Press either the “C“ (+) / “C“ (-) or “E” (+) / “E” (-) buttons. The temperature

display switches over and the DESIRED temperature currently set flashes on

the temperature display.

4. Set the required temperature by pressing the “C“ (+) / “C“ (-) or “E” (+) / “E”

(-) buttons (see section "Temperature setting buttons"). The temperature

display will immediately show the changed setting. Each time the button is

pressed the temperature is adjusted by 1 °C.

5. Once the required temperature has been set, after a short period (approx. 5

sec.) the temperature display will change and again indicate the current

ACTUAL temperature inside the fridge. The display will change from flashing

to continuous illumination.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

No comments

Aeg-Electrolux SW91822-4I User Manual Page 29