AEG Electrolux EDEE63CS User Manual download pdf (Page 33)

electrolux e:line ovens technical specications 33

Technical specications

model product dimensions

(h x w x d) mm

electrical connection min. fuse

rating

max. power

rating

max. current

rating

EOEM61AS 595 x 595 x 567 230-240v/50Hz 16A 3.1kW 12.9A

EOEE62AS 595 x 595 x 567 230-240v/50Hz 16A 3.1kW 12.9A

EOEE63AS 595 x 595 x 567 230-240v/50Hz 16A 3.1kW 12.9A

EUEE63AS 888 x 595 x 567 230-240v/50Hz 25A 5.3kW 22.1A

EDEE63AS 1081 x 595 x 567 230-240v/50Hz 25A 5.8kW 24.2A

EPEE63AS 595 x 595 x 573 230-240v/50Hz 16A 3.1kW 12.9A

EOEK62AK 595 x 595 x 567 230-240v/50Hz 16A 3.1kW 12.9A

error code description comment x

F01 or 01 Door lock sensor alarm This relates to a door lock

failure which is only associated

with the Pyro product

Check wiring/plugs or

replace door lock

F02 or 02 Door lock actuator alarm

F04 or 04 Oven Probe (PT500) out of

range alarm

This relates to the temperature

sensing probe which may be

out of tolerance, or have open/

short circuit connections

Replace probe

F05 or 05 Oven Probe (PT500) too high

temperature alarm

25 Board Temperature Sensor

(NTC) too high temperature

alarm

This relates to the temperature

of the powerboard and/or the

temperature-sensing element

(NTC) on the powerboard

Cooling fan not working

or replace powerboard

26 Board Temperature Sensor

(NTC) out of range warning

6 Board Temperature Sensor

(NTC) out of range alarm

F08 or 08 Communication alarm This relates to an error in

communication between

the powerboard and the IOI

controller. This can occur if the

IOI controller is connected while

the powerboard is energised

Reset power. (Minimum of

20 sec.) or check or replace

data cable

F09 or 09 Software compatibility code

alarm

This relates to a mismatch

between powerboard rmware

version and the IOI controller

rmware version. Most likely

caused by an un-programmed

powerboard

Replace Powerboard

C1 Telescopic runners tted Only applies to Pyro product Remove both side racks and

re-start pyro cycle

C3 Door open Only applies to Pyro product Close door and restart pyro

cycle

F03 or 03 EEPROM check sum alarm Relates to the controller Replace Controller

F14 or 14 EEPROM compatibility code

alarm

Relates to the controller Replace Controller

1 2 ... 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

AEG Electrolux EDEE63CS User Manual Page 33

Comments to this Manuals

Related products and manuals for Cookers AEG Electrolux EDEE63CS