AEG Electrolux EDEE63CS User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
34 technical specications electrolux e:line ovens
Technical specications Hard wiring details
1. Remove terminal cover plate from rear panel of appliance.
2. Fit wires through hole in cover plate and make
connections to terminals.
3. Engage wires into plastic clip. Secure plastic clip with
two long silver screws (supplied in separate bag).
4. Replace cover plate onto rear panel.
Plastic clips
Plastic clip
securing points
Note:




Other Potential complaints
When the door is opened the fan stops (underbench
only) This is a function of the powerboard to help reduce
the blast of air the customer receives when they open
the door.
When a non-fan mode is selected the fan starts. Most
oven modes have a fast heat up function that uses the
fan, fan element, and top (boost) element. Auto fast
heat up can be overridden by selecting a temperature
of 120ºC or less, allowing the function to start, then
increasing the temperature to the desired level.
The light stays on when the door is closed, does not
turn on when the door is open and the oven is off.
The door switch is not activating due to restricted
travel or broken actuator.
Test Mode
Within 10 seconds of powering up simultaneously press
the timer button and start/stop time ‘+’ button, this will
enter ‘TEST MODE’ for a maximum of 5 minutes.
Firstly displayed will be the software version and model
No. Then using the function ‘
^
’ and ‘v’ buttons scroll
through door lock test (Pyro only) individual element and
light, cooking fan, cooling fan and temperature probe
etc. functions.
Intermittent problems
Check for sticking buttons.
Sometimes removing the control panel and re-tting it
cures this. First un-clip the control panel, remove all the
buttons, ret the control panel then the buttons.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments