Aeg-Electrolux C41022GN-M User Manual download pdf (Page 8)

Instructions for the installer

3. Installation

DIMENSIONS OF THE COOKERS

3.1 General warnings

It is the law that a competent person installs all gas appliances. In the UK Corgi gas

installers are approved to work to safe and satisfactory standards. The cooker must be

installed in accordance with BS 6172. Failure to install the cooker correctly could invalidate

the warranty liability claims could and could lead to prosecution.

The manufacturer declines any responsibility for damage incurred by persons, animals or

objects that is caused by not following the above guidelines (cfr. chapter “2. Warnings for

safety and use”).

The technical data is indicated on the plate located on the back of the appliance. The adjustment

conditions are shown on a label applied to the packing and the appliance.

Do not use the oven door handle for handling the appliance, or for removing the appliance

from the packing.

3.2 Fitting the adjustable feet

Before turning the cooker over, we recommend removing all the parts that are not stably attached

to it, in particular the cooking hob grids and burners. To lighten the weight of the cooker, the

accessories inside the oven may also be removed, thereby preventing accidental damage during

the overturning operation.

The cooker is delivered with the feet removed. Before moving and hooking up the cooker, take the

feet from the packing and screw them onto the cooker. This can be done in one of two ways:

A Lifting the cooker off the floor.

B Laying the cooker on its back.

The final regulation of the feet to level the

cooker to the floor will be done after the

gas and electric hook-ups have been

made.

Should it be necessary to drag the cooker, screw the feet in completely and carry out the final

regulation only when the other operations are completed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

No comments

Aeg-Electrolux C41022GN-M User Manual Page 8