AEG Electrolux Service 7000 Operations Instructions download pdf (Page 5)

Switch Mode Power Supply AC 7000

Page 5 of 24 0208 BAL, en

1. Safety Regulations!

1.1 Important Instructions and Explanations

The instructions for operation and maintenance as well as the follow-

ing safety regulations must be complied with to safeguard the safety

of personnel as well as the function of the unit. All personnel install-

ing/dismantling, starting up, and servicing the unit must be familiar

with and observe these safety regulations. Only qualified personnel

may perform the described work with suitable and intact tools, equip-

ment, test equipment and materials.

1.2 Accident Prevention Regulations

Compliance with the accident prevention regulations valid in the

country of application and the general safety regulations in accor-

dance with IEC 364 is mandatory.

The following must be observed prior to any work on the switch mode

power supply:

disconnect the power supply,

- secure against reactivation,

- verify that the unit is disconnected from the power supply,

- earth and short the circuit,

- cover or isolate any neighbouring power-supplied units.

1.3 Qualified Personnel

The SMPS may only be transported, installed, connected, started,

serviced and operated by qualified personnel who are familiar with

the pertinent safety and installation regulations. All work performed

must be inspected by responsible experts.

The qualified personnel must be authorised to perform the work by

the competent safety officer.

Qualified personnel is defined as personnel

- having completed training and gained experience in the re-

spective field,

- familiar with the pertinent standards, rules and regulations and

accident prevention regulations,

- having received instruction on the mode of operation and op-

erating conditions of the switch mode power supply,

- capable of recognising and preventing dangers.

Regulations and definitions for qualified personnel are contained in

DIN 57105/VDE 0105, Part 1.

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

AEG Electrolux Service 7000 Operations Instructions Page 5