Aeg-Electrolux B3781-5-M User Manual download pdf (Page 22)

• Clean stubborn dirt with a special oven cleaner.

• Clean all oven accessories (with a soft cloth with warm water and cleaning agent) after

each use and let them dry.

• If you have nonstick accessories, do not clean them using an aggressive agents, sharp

edged objects or dishwasher. It can destroy nonstick coating!

Pyrolytic cleaning

1. Remove all parts from the oven.

If you do not remove the shelf support rails, the clock display shows 'C1' and pyrolytic

cleaning procedure cannot start.

2. Remove the worst of the residue manually.

3. Set oven function Pyroluxe menue

– "3:15" appears in the display,

–Duration

flashes for approximately 5 seconds.

While Duration

flashes, use + or - to set the necessary length for the procedure.

You can set "2:15" (P2 - Pyroluxe menue light) for less dirt and "3:15" (P1 - Pyroluxe

menue intensive) for more dirt.

If Duration no longer flashes, push the Selection button again and then set length for

the pyrolytic procedure.

You can also change switch off time for pyrolytic cleaning using the clock function End

(within 2 minutes of the pyrolytic cleaning starts).

4. Pyrolytic cleaning starts.

During pyrolytic cleaning the light does not operate.

When the oven reaches pre-set temperature, the door locks.

The bars of the heat indicator come up, until the door unlocks again.

Shelf Support Rails

Removing the shelf support rails

1. Pull the front of the shelf support rail

away from the side wall.

Care and cleaning

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Aeg-Electrolux B3781-5-M User Manual Page 22