Aeg-Electrolux BS9304001M User Manual download pdf (Page 16)

Symbol Function Description

End Time

To set the switch-off time for an heating function (max. 23 h

59 min).

You can use Duration and End Time at the same time, if you want to automatically activate

and deactivate the appliance on a given time later.

If you set the time for a clock function, the time starts to count down after 5 seconds.

If you use the clock functions Duration and End Time, the appliance deactivates the heating

elements after 90% of the set time. The appliance uses the residual heat to continue the

cooking process until the time ends (3-20 minutes).

Setting the Duration and End Time

1. Set the heating function.

2. Press

repeatedly until the display shows the necessary clock function and the rela-

ted symbol.

3. Use the shuttle to set the necessary time. Press OK to confirm.

After 90% of the set time, an acoustic signal sounds. The appliance deactivates. The

display shows a message.

4. Press a sensor field or open the door to stop the signal.

With Duration and End Time the appliance deactivates automatically.

With Duration and End Time you must set the heating function and the temperature first.

Then you can set the clock function.

When you use the Core Temperature Sensor, Duration and End Time do not work.

Heat + Hold

You can activate or deactivate the function in the Basic Settings menu.

The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activates

after the baking or roasting procedure ends.

Conditions for the function:

• The set temperature is more than 80°C.

• The function Duration is set.

Activating the function

1. Activate the appliance.

2. Select the heating function.

3. Set the temperature above 80°C.

4. Press

again and again until the display shows Heat + Hold . Press OK to confirm.

When the function ends, an acoustic signal sounds.

16 Clock functions

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

Aeg-Electrolux BS9304001M User Manual Page 16