Aeg-Electrolux L50840 User Manual download pdf (Page 16)

Interrupting a programme

Depress the Start/Pause button to interrupt a programme which is running, the

corresponding light starts to flash. Depress the button again to restart the

programme.

Cancelling a programme

Turn the selector dial to «O» to cancel a programme which is running. Now you

can select a new programme.

Opening the door after the programme has started

First set the machine to pause by pressing the Start/Pause button.

After some minutes the door can be opened.

If the door remains locked, this means that the machine is already heating, that

the water level is above the bottom edge of the door. In this case the door can

not be opened.

If you cannot open the door but you need to open it you have to switch the

machine off by turning the selector dial to «

O» . After about some minutes the

door can be opened (pay attention to the water level and temperature!).

After closing the door, it is necessary to select the programme again and to press

the Start/Pause button.

At the end of the programme

The machine stops automatically. The Start/Pause and «A» (Functioning) lights

go off and the phase light «B» (End) illuminates.

If the Rinse Hold option has been selected, the light remains lit, the

phase light «B» (End) illuminates, the door remains locked to indicate that the

water must be emptied out before opening the door.

To empty out the water please read the steps on the Rinse Hold option

paragraph.

Turn the programme selector dial to «O» to switch the machine off. Remove the

laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the

door open to prevent the formation of mildew and unpleasant smells.

Use

132969511.qxd 25/10/2008 11.37 Page 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

Aeg-Electrolux L50840 User Manual Page 16