Aeg-Electrolux L50840 User Manual download pdf (Page 30)

Something not working

Problem Possible cause/Solution

The machine fills then empties

immediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «water drainage»

section.

The machine does not empty

and/or does not spin:

The drain hose is squashed or kinked. (Yellow

Start/Pause pilot light flashes)

• Check the drain hose connection.

The drain pump is clogged. (Yellow Start/Pause

pilot light flashes)

• Clean the drain pump.

The option has been selected.

• Disable the option .

• Select the Drain or Spin programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent (creates

too much foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the

inlet hose fittings. It is not always easy to see this as

the water runs down the hose; check to see if it is

damp.

• Check the water inlet hose connection.

The drain hose is damaged.

• Change it with a new one.

The cap on the emergency emptying hose has not

been replaced after cleaning the pump.

• Put the cap back on the emergency emptying and

place the latter back in its seat.

132969511.qxd 25/10/2008 11.38 Page 30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Aeg-Electrolux L50840 User Manual Page 30