Aeg-Electrolux LAV54810 User Manual download pdf (Page 16)

Setting the delay timer

The DELAY TIMER button allows the start of a programme to be de-

layed.

1. Select programme.

2. Press DELAY TIMER button once, if the wash programme is to start after

6 hours. The display 6h lights up.

Press DELAY TIMER button twice, if the wash programme is to start af-

ter 3 hours. The display 3h lights up.

3 If you press the DELAY TIMER button again, the time delay is cancelled.

The display goes out.

3. To activate the time delay, press the START/PAUSE button.

Note: If a time delay of 6 hours is selected, the display 6h is lit. After

3 hours the display changes and 3h is lit. After a total of 6 hours the

wash programme then starts.

Starting a programme

1. Check that the water tap is open.

2. Press the START/PAUSE button. The programme is started or starts after

the time delay set has elapsed.

During the wash programme, the current programme step is displayed

on the programme progress display.

3 If the START/PAUSE button is pressed and the END indicator flashes 4

times and at the same time an acoustic signal sounds 4 times, the door

is not closed properly. Push the door firmly closed and press the START/

PAUSE button again.

Interrupting a programme/adding washing

Interrupting a programme

• A washing programme can be interrupted at any time by pressing the

START/PAUSE button. It is then re-started by pressing the START/

PAUSE button again.

• To stop the washing machine before the programme has ended, turn

the programme knob to OFF. Important! Be careful if there is water

in the appliance!

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

Aeg-Electrolux LAV54810 User Manual Page 16