Aeg-Electrolux LAV54810 User Manual download pdf (Page 17)

Adding washing

It is possible to add washing, as long as the DOOR light is not lit.

1. Press the START/PAUSE button. The door can be opened.

2. Shut door and press the START/PAUSE button again. The programme

continues.

Washing cycle complete/removing the washing

At the end of the programme, END lights up on the programme

progress display. The door can be opened as soon as the DOOR light

goes off and the END light has come on.

1. Open the door and remove the washing.

2. Turn the programme knob to OFF.

3. Close the water tap.

4. After the wash, pull out the detergent dispenser drawer slightly to al-

low it to dry. Leave the door slightly open to air the inside of the wash-

ing machine.

If n (RINSE HOLD) was selected:

After a rinse hold, DOOR and END light up on the programme progress

display.

The water must first be drained:

– Either turn the programme knob to OFF, then to DRAIN and press the

START/PAUSE button (the water is drained without spinning),

– or turn the programme knob to OFF and then to SPIN. Depending

upon the type of washing, reduce the spin speed if necessary and

press the START/PAUSE button (the water is drained and the washing

spun).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

No comments

Aeg-Electrolux LAV54810 User Manual Page 17