AEG Electrolux EBGL70 User Manual download pdf (Page 12)

SETTING THE HEATING

FUNCTION

1.

Touch . The display shows a sym-

bol, the number of the heating function

and the preset temperature.

2.

Touch or to set a heating func-

tion.

3.

Touch or the appliance starts au-

tomatically after five seconds.

If you activate the appliance with

and do not set a heating func-

tion or programme, the appliance

deactivates automatically after 20

seconds.

CHANGING THE

TEMPERATURE

Touch or to change the tempera-

ture in steps of 5 °C.

When the appliance is at the set tempera-

ture, an acoustic signal sounds three times.

The heat-up indicator goes off the display.

CHECKING THE TEMPERATURE

You can see the temperature in the appli-

ance when the function or programme op-

erates.

1.

Touch .

The Temperature/Time display shows

the temperature in the appliance.

If you want to change the tempera-

ture, touch

one more time and

use

or .

2.

Touch to go back to the set tem-

perature. If not, the display shows it

automatically after five seconds.

FAST HEAT UP FUNCTION

The Fast Heat Up function decreases the

heat-up time.

Activating the Fast Heat Up function:

Touch and hold

for more than three sec-

onds.

If you activate the Fast Heat Up function,

the bars on the display

flash one by one

to show that the function operates.

Useful information

• Do not put food into the appliance when

the Fast Heat Up function operates.

• The Fast Heat Up function is not availa-

ble with every heating function. An

acoustic signal sounds if the Fast Heat

Up function is not available for the set

function.

STEAM COOKING

The water drawer cover is in the control

panel.

1.

Press the cover to open the water

drawer.

2.

Fill the water drawer with 800 ml of

water.

The water supply is sufficient for ap-

proximately 50 minutes.

Do not put water directly into the

steam generator!

Use only water as the liquid. Do not

use filtered (demineralised) or distil-

led water.

3.

Activate the appliance.

4.

Touch until the display shows .

5.

Touch to set the DURATION or

END function (refer to "Setting the

END" or "Setting the DURATION"). The

first steam shows after approximately 2

minutes. An acoustic signal sounds

when the appliance is at approximately

the set temperature.

The signal sounds again at the end of

the cooking time.

6.

Touch to deactivate the acoustic

signal and the appliance.

When the steam generator is emp-

ty, an acoustic signal sounds.

When the appliance cools down, soak up

all remaining water from the steam genera-

tor with the sponge. If necessary, clean the

steam generator with some vinegar.

Let the appliance dry fully with the door

open.

ENERGY SAVING

The appliance contains features

which help you save energy

during everyday cooking:

•

Residual heat:

12

www.electrolux.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments