Aeg-Electrolux HK634200XB User Manual download pdf (Page 25)

4. DAILY USE

4.1 Activation and

deactivation

Touch for 1 second to activate or de-

activate the appliance.

The control panel comes on after you ac-

tivate the appliance and goes off after

you deactivate the appliance.

When the appliance is deactivated you

can see only

sensor field.

4.2 Automatic Switch Off

The function deactivates the appliance

automatically if:

•

All cooking zones are deactivated (

).

• You do not set the heat setting after

you activate the appliance.

• You spill something or put something

on the control panel for more than 10

seconds, (a pan, a cloth, etc.). An

acoustic signal sounds some time and

the appliance deactivates. Remove the

object or clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before

you use the appliance again, the cook-

ing zone must be cool.

• You use incorrect cookware. The sym-

bol

comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After some

time

comes on and the appliance

deactivates. See below.

• The relation between heat setting and

times of the Automatic Switch Off

function:

•

, - — 6 hours

•

- — 5 hours

•

— 4 hours

•

- — 1.5 hours

4.3 The heat setting

Touch to increase the heat setting.

Touch

to decrease the heat setting.

The display shows the heat setting.

Touch

and at the same time to

deactivate the cooking zone.

4.4 Automatic Heat Up

You can get a necessary heat setting in a

shorter time if you activate the Automat-

ic Heat Up function. This function sets

the highest heat setting for some time

(see the diagram), and then decreases to

the necessary heat setting.

To start the Automatic Heat Up function

for a cooking zone:

1.

Touch . The symbol comes on

in the display.

2.

Immediately touch . The symbol

comes on in the display.

3.

Immediately touch again and

again until the necessary heat set-

ting comes on. After 3 seconds

comes on in the display.

To stop the function, touch

.

1

2

3

4

5

6

7

8

9

10

11

0

123456789

4.5 Power function

The Power function makes more power

available to the induction cooking zones.

The Power function can be activated for

a limited period of time ( see Technical

Information chapter). After that, the in-

duction cooking zone automatically sets

back to highest heat setting. To activate,

touch

, comes on. To deactivate,

change the heat setting.

4.6 Power management

The power management divides the

power between two cooking zones in a

ENGLISH 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Comments to this Manuals

No comments