Aeg-Electrolux B5741-5-B User Manual download pdf (Page 55)

55Installation Instructions

Installation Instructions

Attention: The new appliance may only be installed and connected by a regis-

tered expert.

Please comply with this. If you do not, any damage resulting is not covered by

the warranty.

1 Safety information for the installer

• The electrical installation is to be set up so that the appliance can be isolated

from the mains with a minimum 3mm all-pole contact separation.

Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be

taken out of the holder), RCD’s and contactors.

• Anti-shock protection must be provided by the installation.

• The built-in unit must meet the stability requirements of DIN 68930.

• Built-in ovens and built-in cooking surfaces are fitted with special connection

systems. For safety reasons, they must only be combined with appliances from

the same manufacturer.

The use of thermal insulation bars is not permitted in cookers with Pyroluxe, if

the recess has a back wall and a solid shelf.

However with a shelf shortened by at least 20 mm and ventilation in the plinth

of the same diameter, it becomes possible to build-in.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 63 64

No comments

Aeg-Electrolux B5741-5-B User Manual Page 55