AEG Electrolux 700 D Operations Instructions download pdf (Page 18)

Check the content is complete:

♦ PROTECT A. with 500 or 700 VA

♦ Mains connection cable with shockproof plug

acc. to CEE 7/7

Second mains connection cable with UK plug

acc. to BS 1363

♦ Two device connecting cables

♦ USB / RS232 communication cable

♦ Management software “CompuWatch” on CD

♦ Operating instructions

Please contact our hotline (see page 5) in case of any

discrepancy.

The original packaging provides effective protection against

mechanical shocks and should be retained so the unit can be

transported safely later on.

Please keep the plastic packaging bags away

from babies and children in order to safeguard

against suffocation accidents.

4.2 Installation Site

PROTECT A. is designed to be installed in a protected

environment. When installing the unit, pay attention to such

factors as sufficient ventilation and suitable ambient

conditions.

PROTECT A. is air-cooled. Do not obstruct the

air vents!

The UPS should preferably be operated at room

temperature (between 15° C and 25° C).

Install the UPS in a room that is dry, relatively dust-free and

free of chemical vapours.

Make sure that no magnetic storage media are stored and/or

operated close to PROTECT A.

Check the nameplate to make sure the voltage

and frequency data correspond to the values

applicable to your loads.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

AEG Electrolux 700 D Operations Instructions Page 18