Aeg-Electrolux HG995440XB User Manual download pdf (Page 7)

Gas Connection

Choose fixed connections or use a flexible pipe in stainless steel in compliance with the reg-

ulation in force. If you use flexible metallic pipes, be careful they do not come in touch with

mobile parts or they are not squeezed. Also be careful when the hob is put together with an

oven.

Make sure that the gas supply pressure of the appliance obeys the recommended values.

The adjustable connection is fixed to the comprehensive ramp by means of a threaded nut

G 1/2". Screw the parts without force, adjust the connection in the necessary direction and

tighten everything.

1 End of shaft with nut

2 Washer (additional washer is only for Slovenia and Turkey)

3 Elbow

4 Rubber pipe holder for liquid gas (only for Slovenia and Turkey)

Flexible nonmetal pipes connection:

If it is possible to easily control the connection in its full area, you can use a flexible pipe.

Tightly attach the flexible pipe by clamps.

Liquid gas: use the rubber pipe holder. Always engage the gasket. Then continue with the

gas connection. The flexible pipe is prepared for apply when:

– it can not get hot more than room temperature, higher than 30°C;

– it is no longer than 1500 mm;

– it shows no throttles;

– it is not subject to traction or torsion;

– it does not get in touch with cutting edges or corners;

– it can be easily examined in order to check its condition.

The control of preservation of the flexible pipe consists in checking that:

– it does not show cracks, cuts, marks of burnings on the two ends and on its full length;

– the material is not hardened, but shows its correct elasticity;

– the fastening clamps are not rusted;

– expired term is not due.

Installation

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Aeg-Electrolux HG995440XB User Manual Page 7