Aeg-Electrolux L12843VIT User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
17
17
Select the DELAY START by pressing button 9
Before you start the programme, if you wish to delay the start, press button
9 repeatedly, to select the desired delay. The corresponding symbol will appear
on the display.
The washing programme can be delayed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20 hours by pressing this button.
The selected delay time value will appear on the display for a few seconds, then
the duration of the programme will appear again.
You must select this option after you have set the programme and before you
press button
8. You can modify or cancel the delay time at any moment, before
you press this button.
The door will be locked throughout the delay time. If you wish to add laundry in
the machine during the delay time, press button
8 to set the machine to pause.
Add the laundry, close the door and press button
8 again.
Selecting the delayed start:
Select the programme and the required options;
Select the delay start;
Press button 8: the machine starts its hourly countdown. The programme will
start after the selected delay has expired.
Cancelling the delayed start after having started the programme
set the machine to PAUSE by pressing button 8;
press button 9 once until the symbol 0’ is displayed;
press button 8 again to start the programme.
Important!
The Delay start cannot be selected with DRAIN programme
.
Altering an option or a running programme
It is possible to change some option before the programme carries it out. Before
you make any change, you must pause the machine by pressing the button
8.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to
O/OFF
and then to the new programme position.
Start the new programme by depressing button
8 again. The washing water in
the tub will be not emptied out.
Interrupting a programme
Press button 8 to interrupt a programme which is running, the corresponding
light starts blinking. Press this button again to restart the programme.
Use
132962540.qxd 28/07/2008 12.02 Pagina 17
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Comments to this Manuals

No comments