Aeg-Electrolux L12843VIT User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
18
Use
Cancelling a programme
Turn the selector dial to
O/OFF
to cancel a programme which is running. Now
you can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing button 8. If the pilot light 10.3 goes
off, the door can be opened.
If the pilot light
10.3 remains on and the door is locked, this means that the
machine is already heating or that the water level is too high. In this case the
door cannot be opened.
If you cannot open the door but you need to open it you have to switch the
machine off by turning the selector dial to
O/OFF
. After a few minutes the
door can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again
and to press button
8.
At the end of the programme
The machine stops automatically, the pilot light of button 8, the pilot light 10.1
or 10.2 and 10.3 go off and a blinking 0 will appear on the display. Some
acoustic signals sound. The door can be opened.
If a programme or an option that ends with water still in the tub has been
selected, the pilot light
10.3 and the light of the Rinse Hold option remain lit
and the door is locked to indicate that the water must be emptied out before
opening the door.
Follow the instructions below to empty out the water:
turn the programme selector dial to
O/OFF
select the DRAIN or SPIN programme
reduce the spin speed if needed, by pressing the relevant button
press button 8
when the programme has finished the display shows a blinking 0. The door can
now be opened.
Turn the programme selector dial to
O/OFF
to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant
132962540.qxd 28/07/2008 12.02 Pagina 18
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Comments to this Manuals

No comments