Aeg-Electrolux L74950 User Manual download pdf (Page 12)

The display shows the following information:

Duration of the selected programme

After selecting a programme, the duration is displayed in hours and minutes (for

example

2.05). The duration is calculated automatically on the basis of the

maximum recommended load for each type of fabric.

After the programme has started, the time remaining is updated every min

ute.

Delay start

The selected delay (20 hours max) set by means of the relevant button appears

on the display for about 3 seconds (for example

90’), then the duration of the

previously selected programme is displayed.

The DELAY START symbol will appear on the display.

The delay time value decreases by one unit every hour and then, when remains 1

hour, the time decreases every minute.

Incorrect option selection

If an option which is not compatible with the set wash programme is selected,

the message Err is displayed for about 2 seconds and the yellow light of button

7 starts blinking.

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for

example

E20 (see chapter «What to do if...»).

End of the programme

When the programme has finished a blinking zero 0 is displayed, the DOOR

symbol disappears and the door can be opened.

If your laundry is not removed during 10 minutes after the programme is finished,

the backlight of the display switches off and the energy saving system will be

enabled.

Only the button

7 pilot light is blinking to indicate that the appliance has to be

switched off.

By pressing any buttons the appliance will come out from the energy saving status

and you could set another washing programme or swich off the appliance.

DELAY START - symbol

CHILD SAFETY LOCK - symbol

Display

9.8

9.9

9.7

132963630.qxd 14/05/2008 12.13 Pagina 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

No comments

Aeg-Electrolux L74950 User Manual Page 12