EN User ManualWashing MachineL 87495 XFL
ProgrammeTemperature rangeMaximumloadMaximumspin speedProgramme description(Type of load and soil level)Anti-Allergie60°C9 kg1400 rpmWhite cotton item
ProgrammeTemperature rangeMaximumloadMaximumspin speedProgramme description(Type of load and soil level) Glätten40°C1.5 kg Steam programme for synthet
Programmes Load (kg) Energy con-sumption(kWh)Water con-sumption(litre)Approxi-mate pro-gramme du-ration (mi-nutes)Remainingmoisture(%)1)Koch/Bunt 60 °
7.4 Extra Spülen With this option you can add some rinsesto some washing programmes, refer to"Programme chart".Use this option for persons a
8.3 Permanent Extra RinseWith this option you can permanentlyhave an extra rinse when you set a newprogramme.• To activate/deactivate this optionpress
10.4 Check the position of theflap1. Pull out the detergent dispenser untilit stops.2. Press the lever down to remove thedispenser.123. To use powder
10.7 Starting a programmewith the delay start1. Press button Zeitvorwahl again andagain until the display shows thenumber of minutes or hours of delay
After five minutes from the end of theprogramme, the energy saving functionautomatically deactivates the appliance.When you activate theappliance agai
small and/or delicate items (e.g.underwired bras, belts, tights, etc. ).• A very small load can cause balanceproblems with the spin phase. If thisoccu
Always obey the instructionsthat you find on thepackaging of the product.12.3 Maintenance washWith the low temperature programmes itis possible that s
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.
12.7 Cleaning the drain filterDo not clean the drain filter if the water in the appliance is hot.1.122.2113. 4.125.126.www.aeg.com20
7. 8.129.12 12.8 Cleaning the inlet hose and the valve filter1.1232.ENGLISH 21
3. 4.45°20°12.9 Emergency drainBecause of a malfunction, the appliancecannot drain the water.If this occurs, do steps (1) through (9) of'Cleaning
the water tap. Contact the AuthorisedService Centre.WARNING!Deactivate the appliancebefore you do the checks.13.2 Possible failuresProblem Possible so
Problem Possible solutionThe spin phase does notoperate or the washingcycle lasts longer thanusually.Set the spin programme. Make sure that the drain
After the check, activate the appliance. The programme continues from the point ofinterruption.If the problem occurs again, contact the Authorised Ser
Level of protection against ingress of solid particlesand moisture ensured by the protective cover, ex-cept where the low voltage equipment has no pro
ENGLISH 27
www.aeg.com/shop132928972-A-412015
1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i
• The appliance is to be connected to the water mainsusing the new supplied hose-sets. Old hose sets mustnot be reused.• If the supply cord is damaged
2.3 Water connection• Make sure not to cause damage tothe water hoses.• Before you connect the appliance tonew pipes or pipes not used for along time,
3.2 How to activate the childsafety deviceThis device prevents children or petsfrom being closed in the drum.Turn the device clockwise, until thegroov
4.2 DisplayA HJKLC D E F GBIThe display shows:ATemperature of the set programmeCold waterBSpin speed of the set programmeNo Spin symbol1)Rinse hold sy
FYou cannot open the appliance door when the symbol is on. You canopen the door only when the symbol goes off.If the programme is completed but the sy
KThe extra rinse symbol comes on when this function is activated.The value shows the total number of the rinses.The indicator bar is fully filled when
Comments to this Manuals