Aeg-Electrolux F88040VIP User Manual download pdf (Page 63)

Problem Possible cause Possible solution

The dishes are wet and dull. The rinse aid dispenser is emp-

ty.

Fill the rinse aid dispenser with

rinse aid.

The multitab function is on.

(The rinse aid dispenser is au-

tomatically off).

Activate the rinse aid dispens-

er. Refer to 'How to activate

the rinse aid dispenser'.

How to activate the rinse aid dispenser

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons B and C.

– The indicator lights for function buttons A, B, and C start to flash.

4. Release function buttons B and C.

5. Press function button B.

– The indicator lights for function buttons A and C go off.

– The indicator light for function button B continues to flash.

– The display shows the current set.

Rinse aid dispenser deactivated

Rinse aid dispenser activated

6. Press function button B again.

– The display shows the new adjustment.

7. Switch off the appliance to keep the operation.

TECHNICAL DATA

Dimensions Width 596 mm

Height 818 - 898 mm

Depth 550 mm

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Maximum 8 bar (0,8 MPa)

Water supply

Cold water or hot water maximum 60 °C

Capacity Place settings 12

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

The rating plate on the inner edge of the appliance door shows the electrical connection

data.

If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic

panels and aeolian), use a hot water supply to decrease energy consumption.

Technical data

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

No comments

Aeg-Electrolux F88040VIP User Manual Page 63