Aeg-Electrolux E8871-4-M EURO User Manual download pdf (Page 55)

Pyrolytic cleaning

1 Warning: The oven gets very hot during this process. Keep small chil-

dren away.

1 Important! All removable parts including the side rails must be re-

moved from the oven before using the pyroluxe function.

3 If you use the oven shelf runners that are available as special accesso-

ries, these must be removed before pyrolytic cleaning.

If the oven shelf runners are still in place, ‘C1’ appears in the time dis-

play.

The pyroluxe process then cannot be started due to a safety cut-out

that protects the oven shelf runners.

Pyroluxe

1. First remove the worst of the residue manually.

2. Select oven function Pyroluxe .

– P1 appears in the temperature display.

– “3:15” appears in the time display,

– Cook time flashes for approx. 5 seconds.

Pyrolytic cleaning then starts.

3 The Light does not work.

When the temperature set is reached, the door is locked.

The symbol is activated and the bars of the heat indicator light up,

until the door is unlocked again.

Changing the length of the Pyroluxe

1. Proceed as described in the section Pyroluxe.

2. As long as Cook time is flashing select the desired length of the py-

roluxe using or :

“2:15” or “3:15”.

Cook time flashes for approx. 5 seconds.

Pyrolytic cleaning then starts.

3 If Cook time is no longer flashing, press the selection button

Selection again and then perform the setting procedure.

3. When the pyroluxe is completed, press any button to end.

Changing the Pyroluxe switch off time

The Pyroluxe switch off time can be changed using the clock function

End time (within 2 minutes of setting the Pyroluxe).

When are the different pyroluxes set:

– 2:15 = Pyroluxe Quick: for a light degree of soiling

– 3:15 = Pyroluxe Intensive: for a high degree of soiling.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 63 64

No comments

Aeg-Electrolux E8871-4-M EURO User Manual Page 55