Aeg-Electrolux S73800KMX1 User Manual download pdf (Page 22)

1

34

2

• Unscrew the hinge (1) and remove the

cover plate (2) and the support (3).

• Remove the cover (4) on the opposite

side and install the support (3) the cover

plate (2) and the hinge (1). Install the

cover (4) on the opposite side.

1

2

3

• Unscrew the lower hinge (1). Move the

pin to the opposite side (2).

• Unscrew and move the pedal to the op-

posite side (3).

• Screw on the lower hinge on the oppo-

site side.

• Tighten the pin with the adjustment

spanner supplied.

• Install the handle on the opposite side.

• Raise the appliance and install the ven-

tilation grille.

• Put the cabinet in position.

WARNING!

Reposition, level the appliance,

wait for at least four hours and

then connect it to the power sock-

et.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the cabi-

net.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natu-

ral fitting of the gasket.

22

www.aeg.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments