Aeg-Electrolux KAM80 User Manual download pdf (Page 12)

g

12

Connecting to the mains supply

0 Insert plug into mains socket.

Making coffee using ready

ground coffee

3

You can make coffee using ready

ground coffee.

0 Pour in water.

0 Swing out swivel filter (Figure 1/B).

0 Insert filter paper.

0 Add ground coffee (Figure 8).

0 Swing swivel filter back.

0 Place coffee jug on the warming plate.

0 Turn the rotary knob (Figure 1/M) to

the position .

0 Swich the appliance on using the On/

Off-switch (Figure 1/K).

The red indicator will come on.

0 Press the start button (Figure 1/L).

The green indicator will flash.

The brewing procedure will start.

Making coffee using the coffee

grinder

3

You can prepare coffee with beans.

Therefore you must set the number of

cups with the rotary switch (Figure

1/M). The grinder will grind the appro-

priate amount of coffee beans.

2, 4, 6, 8 or 10 cups can be set.

0 Pour in water.

0 Swing out the swivel filter (Figure 1/B).

0 Insert filter paper.

0 Swing the swivel filter back.

0 Place coffee jug on the warming plate.

0 Swing out the water supply (Figure

1/D) using the swivel lever (Figure 1/H)

until it engages (Figure 9).

0 Set the desired number of cups with

the rotary switch (Figure 1/M).

0 Swich the appliance on using the On/

Off-switch (Figure 1/K).

The red indicator will come on.

0 Press the start button (Figure 1/L).

Grinding will begin at once, the green

indicator flashes quickly.

Once the coffee has been ground, the

water supply swings back automati-

cally to the brewing position and

brewing begins, the green indicator

flashes slowly.

Switching off

Switch the appliance off with the On/

Off-switch (Figure 1/K). The red indica-

tor goes off.

Warming plate (Figure 1/N)

After brewing the warming plate keeps

the coffee in the glass jug warm. Two

hours after brewing the warming plate

switches off automatically, the green

indicator goes off.

Removing the jug (Figure 11)

When the jug is removed, the anti-drip

valve prevents dripping.

Cleaning (It is imperative that

these instructions are observed!)

Coffee part

The filter insert can be removed for

emptying and cleaning.

0 Swing out the swivel filter.

0 Place your finger in the rear handle

recess (Figure 12) and pull the bracket

up.

This unlocks the filter insert and it can

be removed for cleaning.

0 Activate the anti-drip valve several

times during cleaning.

0 After cleaning the filter insert, fit the

swivel filter. Reposition the bracket

(Figure 13).

The filter insert is now relocked. Please

check that it is positioned and locked

correctly!

822_949_386 KAM80.book Seite 12 Donnerstag, 17. Januar 2008 11:42 11

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 83 84

Comments to this Manuals

No comments