AEG Electrolux ESL 2435 Specifications download pdf (Page 10)

- 10 -

Starting the programme

1. Scrape or rinse off solid food remnants.

2. Load the dishwasher.

(See the basket and loading).

3. Put the correct amount of detergent into the

detergent dispenser and close the lid.

4. Press in the On/Off button. All programme

indicator lamps are lit.

5. Press in the required programme button (see pro-

gramme chart). All other programme indicator

lamps go out.

6. Close the door.

7. Check the strainers/ﬁlters to see if they need to

be cleaned when the dishwasher has ﬁnished

the programme.

Interrupting the programme temporarily

1. Open the door. The programme stops.

2. The programme indicator lamp is lit.

3. Close the door and the programme continues

after about 6 seconds.

Open the door carefully when the dishwasher

is running, since hot steam may escape.

Cancelling the programme

1. Open the door.

2. Press and hold in the combination buttons,

the machine goes to starting position and all

programme indicator lamps are lit.

3. Release the buttons. The programme is now

cancelled and a new programme can be

selected.

If you switch the dishwasher off with the On/Off

button, the selected programme is not ﬁnished, it

is only disrupted. When you start the dishwasher

again, the programme will continue.

Pause function

With the pause function the programme can be temporarily

interrupted for a short period of time.

1. Open the door and press the On/Off button. The

programme stops.

2. All lamps go out.

3. When you want the programme to continue again,

press the On/Off button once more and close

the door. The programme continues.

The programme should not be paused for any

longer then necessary, because the water inside

the dishwasher has cooled down and must be

heated again which increases the power

consumption.

Cancelling the drying phase

In case you do not want to wait until the drying phase is

completed, you can cancel it by opening the door. The

drying phase is now cancelled.

Switching the dishwasher off

Switch the dishwasher off when the buzzer for completed

programme sounds (approx. 15 seconds) or the lamp for

the completed programme cycle is lit.

1. Open the door and press the On/Off button.

2. Leave the door slightly ajar.

Be careful if you open the door immediately

after the programme is ﬁnished, since hot

steam may escape.

This dishwasher is equipped with the new ﬂush

system called ”IMPULSE WASHING”. This

washing system varies both the revolutions of

the pump and the water pressure for more inten-

sive cleaning of the dishes during a programme.

That is why different sections of the programme

cycle do not sound the same.

Using the appliance

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

AEG Electrolux ESL 2435 Specifications Page 10

Comments to this Manuals

Related products and manuals for Dishwashers AEG Electrolux ESL 2435