AEG Electrolux ESL 2435 Specifications download pdf (Page 11)

- 11 -

Maintenance and cleaning

Cleaning the ﬁlters

There are two ﬁlters, a coarse one and a ﬁne one which

should be cleaned after every wash. Lift out these ﬁlters

which are in the base of the dishwasher and wash under

running water.

The dishwasher must not be used without the

ﬁlters. Incorrect repositioning of the ﬁlters will

produce poor wash results.

Cleaning of the ﬁlters is vital to ensure correct

operation of the dishwasher.

Cleaning the spray arm

The holes in the spray arm must be kept free of scraps

for the efﬁciency of the washing action. Inspect the spray

arm regularly. When thorough cleaning is necessary,

remove the spray arm by unscrewing the nut anti-clock-

wise, remove the washer and lift off the spray arm. Wash

the spray arm with hot soapy water using a stiff brush if

necessary to remove scraps.

Re-assemble carefully, making sure the nut is secure.

Cleaning the cabinet

Clean the outside surfaces of the appliance using a mild

(non-abrasive) household cleaning product. Finish by

removing remaining traces of the product with a damp cloth.

Do not use cleaning products which contain

alcohol (spirits), thinners and similar substances.

If the dishwasher is not going to be used for some

time, take the following precautions:

1. Unplug the dishwasher and turn off the water

supply.

2. Fill up the rinse aid container.

3. Make sure the tub is clean by carrying out a

wash programme (without any crockery) using

Finish Dishwasher cleaner, then dry the inside

thoroughly.

4. Leave the door ajar.

Cleaning the outer door

It is possible to remove the outer door from the plastic

door in order to clean inside it if necessary.

1. Unscrew the screws that hold the guides in the

upper corners of the plastic door.

2. The outer door should be supported when

opened out in order to prevent the hinges from

breaking off.

3. If necessary, the door can be removed completely

by inserting a screwdriver or similar tool into the

predrilled holes in the base of the housing to

release the spring clips on the hinges.

When mounting the outer door, snap the hinges into place

and screw the guides back.

Moving the dishwasher

If you have to move the dishwasher (you are moving

house, etc):

1. Unplug it.

2. Turn off the water tap.

3. Remove the water inlet and discharge hoses.

Avoid tilting the dishwasher during

transportation.

Protecting the dishwasher against

freezing

If the dishwasher is placed in an environment

where the temperature sometimes falls below

0° C, there is a risk that the small amount of

water which remains inside the parts of the

dishwasher will freeze and damage it.

To prevent this you should:

1. Turn off the water supply to the dishwasher.

2. Remove the water inlet and discharge hoses.

3. Make sure that there is dishwasher salt in the

salt container for the water softener.

The appliance is only to be used and stored

indoors at normal room temperature. The manu-

facturer accpets no responsibility for any frost

damage.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments

AEG Electrolux ESL 2435 Specifications Page 11

Comments to this Manuals

Related products and manuals for Dishwashers AEG Electrolux ESL 2435