Aeg-Electrolux F50870M User Manual download pdf (Page 16)

Multitab function

The multitab function is for combi detergent tablets.

These tablets contain agents such as detergent, rinse aid and dishwasher salt. Some types

of tablets can contain other agents.

Do a check if these tablets are applicable for the local water hardness. Refer to the in-

structions from the manufacturer.

When you set the multitab function, it stays on until you deactivate it.

The multitab function stops automatically the flow of rinse aid and salt. The rinse aid

indicator light and salt indicator light are deactivated.

The programme duration can increase if you use the multitab function.

Activate or deactivate the multitab function before the start of a washing programme.

You cannot activate or deactivate the multitab function when the programme operates.

Cancel the washing programme, then set the programme again.

To activate the multitab function:

• Press and hold the two multitab buttons (function buttons D and E). The multitab indi-

cator light comes on.

To deactivate the multitab function:

• Press and hold the two multitab buttons (function buttons D and E). The multitab indi-

cator light goes off.

Do these steps if the drying results are not satisfactory:

1. Fill the rinse aid dispenser with rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position 2.

• You can only activate or deactivate the rinse aid dispenser when the multitab function

is activated.

To activate/deactivate the rinse aid dispenser:

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons B and C.

– The indicator lights for function buttons A, B, and C start to flash.

4. Release function buttons B and C.

5. Press function button B.

– The indicator lights for function buttons A and C go off.

– The indicator light for function button B continues to flash.

– The digital display shows the setting.

Rinse aid dispenser deactivated

Rinse aid dispenser activated

6. Press function button B again.

– The digital display shows the new setting.

7. Switch off the appliance to save the operation.

Multitab function

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Aeg-Electrolux F50870M User Manual Page 16