Aeg-Electrolux BP7504000M User Manual download pdf (Page 18)

• The core temperature: refer to the table for the core temperature sensor in the recipe

book.

Only use the core temperature sensor supplied or original replacement parts.

1. Activate the appliance.

2. Put the point of the core temperature

sensor into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket on the side wall

of the appliance.

The display shows a flashing symbol

and the default set core temperature.

The temperature is 60 °C during the first

use, and the last set value during each

subsequent use.

4. Touch or to the set core temperature.

5. Touch

or the settings save automatically after 5 seconds.

You can set the core temperature only when the symbol flashes. If the display shows a

static symbol

before you set the core temperature, use and or to set a new

value.

6. Set the oven function and, if necessary, the oven temperature.

The display shows the current core temperature and

(which shows the relation be-

tween the set oven temperature and the current oven temperature).

The core temperature sensor must stay in the meat and in the socket during the cooking.

While the appliance calculates the approximate duration time, the value of the Count Up

Timer function shows in the Timer/Residual heat display. When the first calculation ends,

the Timer/Residual heat display shows -, and then the approximate duration of the cooking.

The appliance continues to calculate the duration during the cooking. The display updates

at intervals with the new duration value.

7. When the meat is at the set core temperature, the core temperature and flash. An

acoustic signal sounds for two minutes.

Touch a sensor field to deactivate the acoustic signal.

8. Remove the core temperature sensor from the socket and remove the meat from the

appliance.

WARNING!

Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns.

9. Deactivate the appliance.

18 Using the accessories

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

No comments

Aeg-Electrolux BP7504000M User Manual Page 18