Aeg-Electrolux KE7404001M User Manual download pdf (Page 23)

Folding down the heating element

1. Remove the shelf supports.

2. Hold the heating element with the two

hands at the front

3. Pull it forwards against the spring pres-

sure and out along the support on both

sides.

4. The heating element folds down.

The ceiling is ready to clean.

Installing the heating element

1. Install the heating element in opposite

sequence.

Install the heating element correctly on the two sides above the support on the inner wall

of the appliance.

2. Install the shelf supports.

Oven door and glass panels

To clean the oven door remove it.

CAUTION!

Be careful when you remove the door from the appliance. The door is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two

door hinges fully.

3. Close the oven door until the first posi-

tion (angle approximately 45°).

4. Hold of the oven door with one hand on

each side and pull it away from the

oven at an upwards angle.

5. Now you can remove the inner glass

panels and clean them.

To install the door follow the procedure in reverse.

The number of glass panels depends on the model.

CAUTION!

Put the oven door with the outer side down on a soft and level surface to prevent scratches

Removing and cleaning the door glass panels

1. Remove the oven door.

Care and cleaning 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

No comments

Aeg-Electrolux KE7404001M User Manual Page 23