AEG Electrolux 700 D Operations Instructions download pdf (Page 12)

♦ Condensation may occur if the UPS is brought from a

cold environment into the room where it is to be

installed. The UPS must be absolutely dry prior to start-

up. As a result, leave it to acclimatise for at least two

hours.

♦ Never connect the mains input and the UPS output!

♦ Ensure that no fluids or foreign bodies can penetrate

the UPS!

♦ Do not block the air vents of the unit! Make sure, for

example, that children do not insert any objects in the

ventilation openings!

♦ Do not connect household appliances such as

hairdryers to the UPS!

♦ The mains connection should be near the unit and

easily accessible to facilitate disconnecting the AC

input or pulling out the plug!

♦ During operation, do not disconnect the mains

connection cable from the UPS or from the socket

outlet in the building (shockproof socket), otherwise the

protective grounding of the UPS and all the loads

connected to it will be cancelled.

Danger! Electric shocks!

Even after the mains voltage has been

disconnected, the components within the UPS

remain connected to the battery and can thus

cause electric shocks. It is therefore imperative

to disconnect the battery circuit before carrying

out any maintenance or repair work!

If it is necessary to replace the battery or carry

out maintenance work, this must be done by or

under the supervision of a specialist familiar with

batteries and the necessary safety precautions!

Only authorised persons are allowed in the

vicinity of the batteries!

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

AEG Electrolux 700 D Operations Instructions Page 12