Aeg-Electrolux S70170TK User Manual download pdf (Page 10)

Installation

Electrical Connection

The plug socket necessary for connection of your appliance to the

electricity supply should be positioned so that it is possible to pull out

the appliance plug.

Alternatively a concealed spur socket fitted with a 13 A fuse may be

fitted.

If the socket is no longer accessible after installation of the appliance,

the electrical installation must include suitable means of isolating the

appliance from the mains (e.g. fuse, cut-out, current trip or similar

with a minimum contact separation of 3 mm).

☞

Before initial start-up, refer to the appliance serial plate to ascertain if

supply voltage and current values correspond with those of the mains

at the installation location.

e.g.: AC 220 ... 240 V 50 Hz or

220 ... 240 V ~50 Hz

(i.e. 220 to 240 volts alternating current, 50 Hertz).

The rating plate is inside the appliance on the left.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

No comments

Aeg-Electrolux S70170TK User Manual Page 10