Aeg-Electrolux L52840 User Manual Page 1

LAVAMAT 52840User manual Washing Machine

You must select this option after you have set the programme and before you press thebutton 5.You can cancel the delay time at any moment, before you

After closing the door, it is necessary to select the programme and options again and topress button 5.At the end of the programmeThe machine stops au

Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - MaximumFabrics Load - Type of LaundryOptionsDetergentCompartment

Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - MaximumFabrics Load - Type of LaundryOptionsDetergentCompartment

HELPFUL HINTS AND TIPSSorting out the laundryFollow the wash code symbols on each garment label and the manufacturer’s washing in-structions. Sort the

The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.),the colour, washing temperature and degree of soiling.A

Maintenance washWith the use of low temperature washes it is possible to get a build up of residues insidethe drum.We recommend that a maintenance was

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4measuring cup of detergent.Door sealCheck from time to time the door seal

7. When no more water comes out, un-screw the pump cover by turning it an-ti-clockwise and remove the filter. Usepliers, if necessary. Always keep a r

Cleaning the water inlet filtersIf the appliance doesn't fill, it takes a long time to fill with water, the starting button blinksyellow or the d

Thank you for choosing one of our high-quality products.To ensure optimal and regular performance of your appliance please read thisinstruction manual

Emergency emptying outIf the water is not discharged, proceed as follows to empty out the machine:1. pull out the plug from the power socket;2. close

• 2 flashes = «The machine does not empty and/or does not spin», follow the corre-sponding suggestions in «Possible cause/Solutions» box and restart t

Problem Possible cause/SolutionThe machine does not empty and/or doesnot spin:The drain hose is squashed or kinked. (Yellowpilot light of button 5 bli

Problem Possible cause/SolutionThe door will not open:The programme is still running.• Wait the end of washing cycle.The door lock has not been releas

Electrical connectionVoltage - Overall power - FuseInformation on the electrical connection is given on the ratingplate, on the inner edge of the appl

1. After removing all the packaging, care-fully lay machine on it’s back to removethe polystyrene base from the bottom.2. Remove the power supply cabl

4. 0Slide out the relevant plastic spacers.5. Open the porthole and remove the poly-styrene block fitted on the door seal.6. Fill the smaller upper ho

Positioning and levellingInstall the machine on a flat hard floor.Make sure that air circulation around the machineis not impeded by carpets, rugs etc

hose, be sure to tighten the ring nutagain to prevent leaks.The inlet hose must not be lengthened. If it is too short and you do not wish to move thet

from your local Service Force Centre. The joining piece must have an internal diameterof 18 mm.If your drain hose looks like this (see be-low) you do

OPERATING INSTRUCTIONS SAFETY INFORMATIONRead carefully & keep for future reference.• The safety of Your appliance complies with the industry stan

In the interest of the environmentThe appliance should be connected to the FOULdrainage system, the water will then be taken to asewage works for trea

ENVIRONMENT CONCERNSThe symbol on the product or on its packaging indicates that this product may not betreated as household waste. Instead it shoul

www.aeg.com/shop 192989731-A-102011

• All packing and transit bolts must be removed before use. Serious damage can occur tothe product and to property if this is not adhered to. See rele

• Make sure that children or pets do not climbinside the drum. To prevent children or petsbecoming trapped inside the drum the ma-chine incorporates a

Detergent dispenser drawer Compartment for prewash phase or stain re-mover.The prewash detergent is added at the beginningof the wash programme.The st

Indicator pilot lights (7)After having pressed the button 5, the WASHINGpilot light (7.1) comes on.When the pilot light 7.1 comes on this meansthat th

1. Pull out the dispenser drawer until itstops. Measure out the amount of de-tergent required, pour it into the mainwash compartment and, if you wish

Press the button 2 repeatedly to change the spin speed, if you want your laundry to bespun at a speed different from the one proposed by the washing m