Aeg-Electrolux L61470WDBI User Manual download pdf (Page 34)

16.6 Preparation and assembly of the door

The appliance is originally pre-arranged for

the assembly of a door opening from right to

left.

16-22 mm

22±1,5 mm

416

mm

X

595-598 mm

Ø 35 mm

14 mm

Door

The dimensions of the door should be:

• width 595 - 598 mm

• thickness 16-22 mm

• the height X depends on the height of the

adjacent furniture's base.

1

2

Hinges

To mount the hinges it is necessary to drill

two holes (dia. 35 mm, depth12.5-14 mm

depending on the depth of door furniture) on

the inner side of the door.

The distance between the holes hobs fixing

centres must be 416 mm. The distance from

upper edge of the door to the centre of the

hole depends on the adjacent furniture's

dimensions.

The hinges will be fixed to the door by means

of screws for wood 1 and 2 supplied with the

appliance.

B

A

Mounting the door

WARNING!

Do not remove the screw B.

Fix the hinges to the appliance by means of

the M5x15 screws.

The hinges can be adjusted to compensate

for possible uneven thickness of the door.

To align the door perfectly it is necessary to

loosen the screw , adjust the door and

tighten the screw A again.

www.aeg.com34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments