Aeg-Electrolux L61470WDBI User Manual

EN User ManualWashing MachineL61470WDBI

4.3 Phase indicatorsABCAfter you have pressed the button Start/Pause,the Waschen (A) indicator comes on.The appliance is operating.When you set a dryi

ProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level) Wolle/Seide30°C - Cold2 kg1200 rpmMachine was

ProgrammeU./Min.Fleck-en 1)Zeit Spa-ren 2)Extra Spü-lenZeitvor-wahlKoch/Bunt + Vorwäsche Pflegeleicht Leichtbügeln Fei

Dryness Level Type of fabric Load(kg)Spinspeed(rpm)Suggestedduration(mins)Iron DrySuitable for ironingCottons and Linen(sheets, tablecloths, shirts,et

7.2 Flecken Set this option to add the stain phase toa programme.Use this option for laundry with hardstains to remove.When you set this option, put t

9. BEFORE FIRST USE1. Put 2 litre of water in the detergentcompartment for washing phase.This activates the drain system.2. Put a small quantity of de

The programme dial can be turnedeither clockwise or anticlockwise.Ein/Aus = Reset programme/switchingOFF of the applianceIf you turn the programmedial

10.7 Interrupting aprogrammePress button Start/Pause to interrupt aprogramme which is running, thecorresponding indicator starts blinking.Press button

11.1 Drying settingThe recommended load sizeis 3 kg for cottons and linen,and 2 kg for synthetic items.You can also to dry up to 4kg of cotton items (

CAUTION!Do not use a dosingdevice/ball when carryingout a washing and dryingprogramme.1. Load the laundry one item at a time.2. Put the detergent and

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

• Do not wash together white andcoloured items.• Some coloured items can discolourwith the first wash. We recommendthat you wash them separately for t

13.7 Items not to dryDo not set a drying programme forthis laundry:• Very delicate items.• Synthetic curtains.• Pieces of clothing with metal inserts.

the drum. Make regularly a maintenancewash. To do this:• Remove the laundry from the drum.• Set the cotton programme with thehighest temperature with

14.6 Cleaning the drain filterThe pump should be inspected regularly and particularly if:• The appliance does not empty and/or spin.• The appliance ma

6. Remove foreign bodies and fluff from thefilter seat and from the filter impeller.7. Check carefully whether the pump impellerrotates (it rotates je

3. 4.45°20°14.8 Frost precautionsIf the appliance is installed in an areawhere the temperature can be less than0° C, remove the remaining water fromth

15.2 Possible failuresProblem Possible solutionThe programme doesnot start.• Make sure that the mains plug is connected to the mainssocket.• Make sure

Problem Possible solutionYou cannot open the ap-pliance door.• Make sure that the washing programme is finished.• Set the drain or the spin programme

16. INSTALLATION16.1 UnpackingWARNING!Remove all the packaging and the transit bolts before installing theappliance.Use the gloves. Remove the externa

Put one of the polystyrene packagingelements on the floor behind the appliance.Carefully put down the appliance with therear side on it. Make sure not

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i

Remove the three bolts. Use the key suppliedwith the appliance. Pull out the plasticspacers.Put the plastic caps in the holes. You can findthese caps

• After having levelled the appliance,tighten the lock nuts.WARNING!Never place cardboard, wood or similar materials under the appliance tocompensate

• Making an U form with the drain hose.On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide t

To a sink spigot• Refer to the illustration. Put the drain hosein the spigot and tighten it with a clip.• Make sure that the drain hose makes aloop to

16.6 Preparation and assembly of the doorThe appliance is originally pre-arranged forthe assembly of a door opening from right toleft. 16-22 mm22±1,

ABCCounter-magnetWARNING!Do not remove the screw B.The appliance is prearranged for a magneticclosure of the door. To enable a correctoperation of

18. ENVIRONMENT CONCERNSRecycle the materials with the symbol .Put the packaging in applicablecontainers to recycle it. Help protect theenvironment a

ENGLISH 37

www.aeg.com38

ENGLISH 39

side, where the appliance door can not be fullyopened.• Connect the mains plug to the mains socket only atthe end of the installation. Make sure that

www.aeg.com/shop132930384-A-312015

or pillows fitted with foam rubber pads should not bedried in the wash dryer.• Fabric softeners, or similar products, should be usedas specified by th

• Do not touch the mains cable or themains plug with wet hands.• Only for UK and Ireland: Theappliance has a 13 A mains plug. If itis necessary to cha

3. PRODUCT DESCRIPTION3.1 Appliance overview7 8 9101 234561Detergent dispenser2Control panel3Door handle4Rating plate5Drain pump filter6Feet for the a

To close the door, turn the deviceanticlockwise until the groove is vertical.4. CONTROL PANEL4.1 Control panel description14001200800400AusU./Min.Flec

The display shows the following information:Duration of the set programmeWhen you set a programme, the display shows the duration in hours andminutes