Aeg-Electrolux LAV66810 User Manual download pdf (Page 19)

Door and rubber collar

Regularly check whether deposits or foreign bodies are present in the

folds of the rubber collar or on the inside of the glass door.

Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small malfunctions

If one of the following fault codes is displayed in the multi-display dur-

ing operation:

– E10 (Problems with water inlet),

– E20 (Problems with water drainage),

– E40 (door open),

please have a look at the following table.

When the fault is remedied, press the START/PAUSE button.

In the event of other faults (E plus a number or a letter): Switch the

appliance off and on again. Re-set the programme. Press the START/

PAUSE button.

If the fault is displayed again, please contact the Customer Care De-

partment and inform them of the fault code.

Problem Possible cause Remedy

Washing machine does

not work.

Mains plug not plugged in

or fuse not working.

Plug in mains plug. Check

fuse.

Door not closed properly.

Close door – there should be

an audible click.

START/PAUSE button was

not pressed for long

enough.

Press START/PAUSE button

for longer.

Door cannot be closed. Child safety device engaged. Release child safety device.

When a button is

pressed, Err appears in

the multi-display.

The selected function can-

not be combined with the

programme set.

Make another selection.

E40 appears.

END display flashes 4x,

at the same time an

acoustic signal sounds

4x.

Door is not closed properly.

Close door properly. Start

programme again.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments

Aeg-Electrolux LAV66810 User Manual Page 19

Comments to this Manuals

Related products and manuals for Washing machines Aeg-Electrolux LAV66810