Aeg-Electrolux LAV66810 User Manual download pdf (Page 29)

• The surface on which the appliance is to be installed must be clean

and dry and free from coverings that move, so that the appliance

does not slide.

• If the location in which the appliance is to be installed is fitted with

small-format tiles, put a rubber mat (available in the shops) under

the appliance.

If the appliance is to stand on a

plinth:

In order for the appliance to be se-

cure on the plinth, fixing plates*)

must be mounted, into which the

appliance is inserted.

If the appliance is to stand on floors that vibrate, e. g. floors of

wooden joists with deal boards:

If possible, install the appliance in one corner of the room.

1. Screw a water-resistant wooden board (at least 15 mm thick) onto at

least 2 of the floor joists.

2. Affix fixing plates *) onto the wooden board, into which the appliance

is inserted.

*) The fixing plates can be obtained from the Customer Care Depart-

ment.

Making the appliance level

The four feet of the appliance are

pre-adjusted.

Large degrees of unevenness can be

compensated for by individually ad-

justing the height adjustable screw

feet.

Use the special spanner supplied to

do this.

Important! Do not use pieces of

wood, cardboard or such like to lev-

el out unevenness in the floor, but

adjust the height adjustable screw

feet instead.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Aeg-Electrolux LAV66810 User Manual Page 29