Aeg-Electrolux LAV66810 User Manual download pdf (Page 30)

Electrical connection

Details about the voltage, type of supply and the fuses required are to

be found on the rating plate. The rating plate is next to the doorway.

Connecting to the water supply

Important!

• This appliance must not be connected to the hot water system.

• When connecting it, use only new hose kits.

• Only connect the appliance to the drinking water supply. Rain water

or water for industrial use may only be used if it fulfils the require-

ments of DIN1986 and DIN1988.

• Do not kink or crush the water inlet hose or drain hose.

Permitted water pressure

The water pressure must be at least 1 bar (= 10 N/cm

=0.1MPa) and may

be a maximum of 10bar (=100N/cm

=1MPa).

– If more than 10bar: Connect a pressure reduction valve.

– If less than 1bar: Disconnect the appliance end of the inlet hose from

the solenoid inlet valve and remove the flow meter. (In addition re-

move the filter using pointed pliers and take out the rubber gasket

behind it.) Re-insert the filter.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Aeg-Electrolux LAV66810 User Manual Page 30