AEG Electrolux PE3820-M User Manual download pdf (Page 10)

Fix the power cable with the clip.

The power cable must be long enough to allow

the appliance to be extracted from the cabinet

to fill the coffee bean container.

The appliance must be earthed in compliance

with legislation.

Electrical connections must be performed by a

qualified electrician following the

instructions.

Position the appliance on the rails, making sure

the pins are correctly inserted in the housings,

then fix it with the screws supplied.

If the height of the appliance requires adjusting,

use the spacer disks provided.

If necessary, correct alignment of the appliance

by positioning the spacers supplied under or at

the sides of the support.

x 16

x 2

Position the rails on the sides of the cabinet as

shown in the figure. Fix with the screws sup-

plied, then extract them completely. If the coffee

maker is installed over a warmer drawer, use the

top surface of this as a reference to position the

rails.

In this case, there will be no surface to rest the

rails on.

app

ox. 350 mm

x 1

x 4 x 8

x 4

560 + 1 mm

x 1

If necessary, fit the trim at the bottom of the

frame to compensate for differences in alignment

with other appliances.

Downloaded from CoffeeMachineManual.com Manuals

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

No comments

AEG Electrolux PE3820-M User Manual Page 10