AEG Electrolux PE3820-M User Manual download pdf (Page 15)

fee, to go back to making coffee using beans,

deactivate the pre-ground coffee function by

pressing the icon (B4) (fig. 8).

NOTE 1: Never introduce pre-ground coffee when

the machine is off or it could spread through the

inside of the appliance.

NOTE 2: Never add more than 1 measure, other-

wise the appliance will not make the coffee.

NOTE 3: Use the measure provided only.

NOTE 4: Introduce only pre-ground coffee for

espresso coffee machines into the funnel.

NOTE 5: If more than one measure of pre-ground

coffee is used and the funnel clogs, push the cof-

fee down with a knife (fig. 21) then remove and

clean the brewing unit and machine as described

in the "Cleaning the brewing unit" section.

DELIVERING HOT WATER

• Always make sure the appliance is ready.

• Make sure the hot water spout is in place (fig.

6).

• Position a container under the spout.

• Press the icon (B13) (fig. 20).

The appliance displays: "HOT WATER PRESS

OK".

Press the OK icon (B9) again and hot water is

delivered from the water spout into the con-

tainer underneath.

You should not deliver hot water for more

than 2 minutes at a time.

To interrupt, press the icon (B13) or the

ESC icon (B6).

The appliance stops delivery once the set

quantity is reached.

CHANGING THE QUANTITY

OF HOT WATER

The machine is set by default to automatically de-

livery 150 ml of hot water.

To change these quantities, proceed as follows:

• Place a container underneath the water spout

(fig. 5).

• Press the icon (B2) to enter the menu

(fig. 15) or press the icons (B7) and

(B8) (fig. 2) until "PROGRAM HOT WATER"

is displayed.

• Press the OK icon (B9) to confirm.

• Select the required quantity of water by pres-

sing the icons (B7) and (B8).

The progress bar shows the quantity of water

selected.

• Press the OK icon (B9) to confirm (or the

ESC icon (B6) to cancel the operation.

• Press the ESC icon (B6) (fig. 18) twice to exit

the menu.

• The appliance is now reprogrammed with the

new settings and is ready.

MAKING CAPPUCCINO

N.B.:

Set the quantity of coffee you want

to use to make the cappuccino in the "Program

cappuccino" function in the menu.

• Select the taste of the coffee you want to use

to make the cappuccino by pressing the

icon (B4).

• Remove the lid of the milk container.

• Fill the container with about 100 grams of

milk for each cappuccino to be prepared (fig.

23). Never exceed the MAX level (correspon-

ding to about 750 ml) marked on the jug.

You should ideally use skimmed or semi-

skimmed milk at refrigerator temperature

(about 5°C).

• Make sure the intake tube is correctly inser-

ted in the rubber washer (fig. 24) then re-

place the milk container lid.

• Position the frothed milk regulator (C1) bet-

ween the words CAPPUCCINO and CAFFE-

LATTE printed on the milk container lid.

The quality of froth can be adjusted by mo-

ving the frothed milk regulator towards the

word CAFFELATTE for a denser froth.

Moving it towards the word CAPPUCCINO

obtains a less dense froth.

16

Downloaded from CoffeeMachineManual.com Manuals

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Comments to this Manuals

No comments