AEG Electrolux THYRO-A Operations Instructions Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
36 37
DANGER
Dangers involved in settings and operation
Risk of injury / Risk of damage to the device or plant
Observe all safety regulations in the chapter on safety.
Setting and operating the thyristor power controller is described in this
chapter.
There are three ways of setting the power controller:
• on DIP switches and potentiometers (on device)
• via bus system (when operated in a bus system)
• via PC interface and Thyro-Tool Family
Certain settings can only be made on the device (DIP switch S1.7, S1.8
and S1.10), e.g. setting the analog input and output.
In the case of certain configurations / connection types, setting on the
device itself is no longer possible:
Operation with bus module (see also page 65, Connecting the bus
module)
- Ground to X22.1: Setpoint comes from bus. DIP switch and potentio-
meter are read in once after being switched on and the setting can
then be changed with the bus module.
- No ground to X22.1: DIP switch and potentiometer are always read
in. Setpoint is read via the analog input.
• Operation with Thyro-Tool Family
- Device in Thyro-Tool mode: DIP switch and potentiometer are
ignored. Settings are read out of the memory and can only be
changed via the PC.
- Device not in Thyro-Tool mode: DIP switch and potentiometer are
read in. Further settings can be changed via the PC. All parameters
are visualized on the PC.
NOTE
Described settings
Settings made on the device itself are described in this chapter. Where
reference is made to settings with a bus module or with the PC, this is
indicated.
4.1 DEVICE OVERVIEW
NOTE
Figures
Only one size of the Thyro-A is depicted in the operating instructions
(8 A/16 A/30 A). The operation and display elements and terminals are
ar-ranged the same in all sizes (see page 90, Dimension drawings).
4. SETTINGS AND OPERATION
a LEDs
g DIP switch S1
e Potentiometer
h Fuse
a
e
g
h
a LEDs
b Power section Slave2
c Power section Slave1
d Power section Master
e Potentiometer
f Heat sink
a
b
c
d
e
f
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 58 59

Comments to this Manuals

No comments