Aeg-Electrolux F88009W0P User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
Problem Possible cause Possible solution
The baskets were not loaded
correctly, water did not touch
all surfaces.
Load the baskets correctly.
The spray arms could not turn
freely because of incorrect ar-
rangement of the load.
Make sure that an incorrect ar-
rangement of the load does not
cause a blockage of the spray
arms.
The filters are dirty or not as-
sembled and installed correctly.
Make sure that the filters are
clean and correctly assembled
and installed.
The quantity of detergent was
not sufficient or missing.
Make sure that the quantity of
detergent is sufficient.
Limescale particles on the
dishes
The salt container is empty. Fill the salt container with salt
for dishwashers.
The water softener is adjusted
on a wrong level.
Adjust the level of the water
softener.
The salt container cap is not
closed correctly.
Ensure that the salt container
cap is correctly closed.
There are streaks, milky stains,
or a bluish layer on glasses and
dishes.
Rinse aid dosage is too high. Decrease the rinse aid dosage.
Dry water drop stains on
glasses and dishes.
Rinse aid dosage is too low. Increase the rinse aid dosage.
The detergent can be the
cause.
Use a different brand of deter-
gent.
The dishes are wet. You have set a washing pro-
gram without drying phase or
with a decreased drying phase.
Let the door stay ajar for some
minutes before you remove the
dishes.
The dishes are wet and dull. The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is activa-
ted (this function automatical-
ly deactivates the rinse aid dis-
penser).
Activate the rinse aid dispenser.
Activating the rinse aid dispenser
1. Switch on the appliance. Make sure that the appliance is in setting mode.
2. Press and hold touchpad Delay and touchpad Start at the same time until the indica-
tors of programs AUTO, PRO and SILENT flash.
3. Release touchpad Delay and touchpad Start .
4. Press touchpad Option .
The indicators of programs AUTO and SILENT go off.
The indicator of program PRO continues to flash.
22 What to do if…
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments