Aeg-Electrolux BE5304001B User Manual download pdf (Page 31)

Problem Possible cause Solution

The oven does not heat up The appliance is switched off Switch on the appliance

The oven does not heat up The clock is not set Set the clock. Refer to "Setting

the clock"

The oven does not heat up The necessary settings are not

set

Make sure, the settings are cor-

rect

The oven does not heat up The automatic cut-out is

switched on

Refer to „Automatic cut-out“

The oven does not heat up The fuse is released Make sure, if the fuse is the

cause for the malfunction. If

the fuse releases again and

again, refer to an authorized

electrician

The oven lamp does not oper-

ate

The oven lamp is defective Replace the oven lamp.

The display shows C2 You want to start the defrost

function but you did not re-

move core temperature sensor

plug from the socket.

Remove the core temperature

sensor plug from the socket

The display shows an error code

that is not in this list

There is an electronic fault • Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows the er-

ror code again, refer to the

Customer Care Department

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the oven cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

INSTALLATION

WARNING!

Refer to "Safety information" chapter.

The built-in unit must meet the stability requirements of DIN 68930.

Installation

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments

Aeg-Electrolux BE5304001B User Manual Page 31

Comments to this Manuals

Related products and manuals for Unknown Aeg-Electrolux BE5304001B